Free Welcome SVG

Welcome in Lilita One SVG

Welcome in Lilita One, as a solid black shape — Welcome in Lilita One. The preview is the SVG file itself.

“Welcome” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 19 mm (3.94 × 0.73 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	10: 7 outer edges and 3 cut-outs
Cut length	482 mm at this size
Narrowest part	3.6 mm at this size
Nodes	149 curve and line segments

Measured from the file. PNG: 2,000 × 433 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.19 in (25 × 5 mm)	0.91 mm	122 mm	310	Fine detail: vinyl and paper only, weed with care
2 × 0.37 in (51 × 9 mm)	1.8 mm	245 mm	105	Vinyl, card and thin sheet
3 × 0.55 in (76 × 14 mm)	2.7 mm	367 mm	48	Vinyl, card and thin sheet
4 × 0.74 in (102 × 19 mm)	3.7 mm	490 mm	24	Any material, including 3 mm wood and acrylic
6 × 1.11 in (152 × 28 mm)	5.5 mm	735 mm	9	Any material, including 3 mm wood and acrylic
8 × 1.48 in (203 × 38 mm)	7.3 mm	979 mm	7	Any material, including 3 mm wood and acrylic
12 × 2.22 in (305 × 56 mm)	11 mm	1,469 mm	5	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome SVG files

← Welcome in Kaushan Script All 12 Welcome designs Welcome in Alfa Slab One →