Welcome with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Welcome” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 26 mm (3.94 × 1.04 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 10: 2 outer edges and 8 cut-outs |
| Cut length | 943 mm at this size |
| Narrowest part | 5.3 mm at this size |
| Nodes | 271 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 585 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.26 in (25 × 7 mm) | 1.3 mm | 240 mm | 260 | Vinyl, card and thin sheet |
| 2 × 0.53 in (51 × 13 mm) | 2.7 mm | 479 mm | 80 | Vinyl, card and thin sheet |
| 3 × 0.79 in (76 × 20 mm) | 4 mm | 719 mm | 36 | Any material, including 3 mm wood and acrylic |
| 4 × 1.06 in (102 × 27 mm) | 5.4 mm | 958 mm | 18 | Any material, including 3 mm wood and acrylic |
| 6 × 1.58 in (152 × 40 mm) | 8.1 mm | 1,437 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.11 in (203 × 54 mm) | 11 mm | 1,916 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.17 in (305 × 80 mm) | 16 mm | 2,874 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Welcome SVG files
-
Welcome with a little house Solid · 3 pieces
-
Welcome in Pacifico Solid · one piece
-
Welcome in Lobster Solid · 2 pieces
-
Welcome in Kaushan Script Solid · 7 pieces
-
Welcome in Lilita One Solid · 7 pieces
-
Welcome in Alfa Slab One Solid · 7 pieces
-
Welcome in Amatic SC Solid · 7 pieces
-
Welcome in block capitals Solid · 7 pieces
← Welcome stencil plate All 13 Welcome designs Welcome with a little house →