Welcome stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “WELCOME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 34 mm (3.94 × 1.32 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 776 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 169 curve and line segments |
Measured from the file. PNG: 2,000 × 721 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.34 in (25 × 9 mm) | 0.43 mm | 197 mm | 220 | Too fine for most machines |
| 2 × 0.67 in (51 × 17 mm) | 0.86 mm | 394 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1 in (76 × 26 mm) | 1.3 mm | 591 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.34 in (102 × 34 mm) | 1.7 mm | 788 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.01 in (152 × 51 mm) | 2.6 mm | 1,183 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.68 in (203 × 68 mm) | 3.5 mm | 1,577 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.02 in (305 × 102 mm) | 5.2 mm | 2,365 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Welcome SVG files
-
Welcome with a drop shadow Layered · 2 pieces
-
Welcome with a little house Solid · 3 pieces
-
Welcome in Pacifico Solid · one piece
-
Welcome in Lobster Solid · 2 pieces
-
Welcome in Kaushan Script Solid · 7 pieces
-
Welcome in Lilita One Solid · 7 pieces
-
Welcome in Alfa Slab One Solid · 7 pieces
-
Welcome in Amatic SC Solid · 7 pieces
← Welcome outline lettering All 13 Welcome designs Welcome with a drop shadow →