Free water bottle SVG

Water bottle tumbler outline SVG

Water bottle tumbler outline, drawn as a line
Water bottle tumbler outline. The preview is the SVG file itself.

The tapered tumbler as a line drawing with its stepped lid, a leaning straw and a band near the rim and the base. Print it as a planning sheet or colour it in.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size40 × 100 mm (1.56 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length668 mm at this size
Narrowest part1.7 mm at this size
Nodes66 curve and line segments

Measured from the file. PNG: 837 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.4 × 1 in (10 × 25 mm)0.43 mm170 mm200Too fine for most machines
0.79 × 2 in (20 × 51 mm)0.86 mm339 mm60Fine detail: vinyl and paper only, weed with care
1.18 × 3 in (30 × 76 mm)1.3 mm509 mm24Vinyl, card and thin sheet
1.58 × 4 in (40 × 102 mm)1.7 mm679 mm12Vinyl, card and thin sheet
2.37 × 6 in (60 × 152 mm)2.6 mm1,018 mm4Vinyl, card and thin sheet
3.16 × 8 in (80 × 203 mm)3.5 mm1,357 mm3Any material, including 3 mm wood and acrylic
4.74 × 12 in (120 × 305 mm)5.2 mm2,036 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Blank skinny tumbler water bottle All 16 water bottles Layered water bottle in four colours →