Free water bottle SVG

Gallon water bottle jug with a handle SVG

Gallon water bottle jug with a handle, as a solid black shape
Gallon water bottle jug with a handle. The preview is the SVG file itself.

A gallon jug from the side: a square body, a sloping shoulder, a handle moulded into one corner with a hole to put your fingers through, a ridged cap and three ribs low down.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size63 × 100 mm (2.49 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length703 mm at this size
Narrowest part2.2 mm at this size
Nodes59 curve and line segments

Measured from the file. PNG: 1,294 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.63 × 1 in (16 × 25 mm)0.56 mm179 mm140Fine detail: vinyl and paper only, weed with care
1.27 × 2 in (32 × 51 mm)1.1 mm357 mm40Vinyl, card and thin sheet
1.9 × 3 in (48 × 76 mm)1.7 mm536 mm15Vinyl, card and thin sheet
2.53 × 4 in (64 × 102 mm)2.2 mm714 mm8Vinyl, card and thin sheet
3.8 × 6 in (96 × 152 mm)3.4 mm1,071 mm3Any material, including 3 mm wood and acrylic
5.06 × 8 in (129 × 203 mm)4.5 mm1,428 mm2Any material, including 3 mm wood and acrylic
7.6 × 12 in (193 × 305 mm)6.7 mm2,143 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Water bottle tracker with tick marks All 16 water bottles Water bottle with a wave and drops →