Free water bottle SVG

Water bottle tumbler with a lid and straw SVG

Water bottle tumbler with a lid and straw, as a solid black shape
Water bottle tumbler with a lid and straw. The preview is the SVG file itself.

A cold-drink tumbler that narrows towards the base, with a stepped lid and a straw leaning out of it. The side is blank apart from one highlight, ready for a name or a decal mock-up.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size40 × 100 mm (1.56 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length452 mm at this size
Narrowest part3.7 mm at this size
Nodes38 curve and line segments

Measured from the file. PNG: 837 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.4 × 1 in (10 × 25 mm)0.94 mm115 mm200Fine detail: vinyl and paper only, weed with care
0.79 × 2 in (20 × 51 mm)1.9 mm230 mm60Vinyl, card and thin sheet
1.18 × 3 in (30 × 76 mm)2.8 mm344 mm24Vinyl, card and thin sheet
1.58 × 4 in (40 × 102 mm)3.8 mm459 mm12Any material, including 3 mm wood and acrylic
2.37 × 6 in (60 × 152 mm)5.6 mm689 mm4Any material, including 3 mm wood and acrylic
3.16 × 8 in (80 × 203 mm)7.5 mm918 mm3Any material, including 3 mm wood and acrylic
4.74 × 12 in (120 × 305 mm)11 mm1,378 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Cute water bottle with a face All 16 water bottles Water bottle tumbler cup with a handle →