Free water bottle SVG

Water bottle with a carry loop SVG

Water bottle with a carry loop, as a solid black shape
Water bottle with a carry loop. The preview is the SVG file itself.

A slim refillable bottle with a narrow neck, a ridged screw cap and a loop on top to hang it by. One highlight down the side and a line near the base are the only cuts, so the front stays blank for a name.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size33 × 100 mm (1.31 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length455 mm at this size
Narrowest part2.6 mm at this size
Nodes68 curve and line segments

Measured from the file. PNG: 717 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.33 × 1 in (8 × 25 mm)0.66 mm116 mm220Fine detail: vinyl and paper only, weed with care
0.67 × 2 in (17 × 51 mm)1.3 mm231 mm70Vinyl, card and thin sheet
1 × 3 in (25 × 76 mm)2 mm347 mm30Vinyl, card and thin sheet
1.33 × 4 in (34 × 102 mm)2.6 mm462 mm14Vinyl, card and thin sheet
2 × 6 in (51 × 152 mm)4 mm693 mm5Any material, including 3 mm wood and acrylic
2.66 × 8 in (68 × 203 mm)5.3 mm925 mm4Any material, including 3 mm wood and acrylic
4 × 12 in (101 × 305 mm)7.9 mm1,387 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Layered water bottle in four colours All 16 water bottles Water bottle outline →