Free water bottle SVG

Insulated water bottle with a strap lid SVG

Insulated water bottle with a strap lid, as a solid black shape
Insulated water bottle with a strap lid. The preview is the SVG file itself.

A stout steel flask with a wide mouth, a deep lid and a strap handle arching over the top. A line marks the base cap and one long highlight runs down the right side.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size47 × 100 mm (1.85 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length522 mm at this size
Narrowest part3.8 mm at this size
Nodes43 curve and line segments

Measured from the file. PNG: 981 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.47 × 1 in (12 × 25 mm)0.97 mm133 mm180Fine detail: vinyl and paper only, weed with care
0.94 × 2 in (24 × 51 mm)1.9 mm265 mm50Vinyl, card and thin sheet
1.41 × 3 in (36 × 76 mm)2.9 mm398 mm21Vinyl, card and thin sheet
1.88 × 4 in (48 × 102 mm)3.9 mm530 mm10Any material, including 3 mm wood and acrylic
2.82 × 6 in (72 × 152 mm)5.8 mm796 mm4Any material, including 3 mm wood and acrylic
3.76 × 8 in (96 × 203 mm)7.7 mm1,061 mm3Any material, including 3 mm wood and acrylic
5.64 × 12 in (143 × 305 mm)12 mm1,591 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Plastic water bottle All 16 water bottles Water bottle tracker with tick marks →