Free water bottle SVG

Plastic water bottle SVG

Plastic water bottle, as a solid black shape
Plastic water bottle. The preview is the SVG file itself.

The throwaway kind: a small ridged cap, a long shoulder, a waist where the label goes and three ribs near the base. The label band is left blank between two lines.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size36 × 100 mm (1.41 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length571 mm at this size
Narrowest part1.7 mm at this size
Nodes92 curve and line segments

Measured from the file. PNG: 765 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.36 × 1 in (9 × 25 mm)0.43 mm145 mm210Too fine for most machines
0.72 × 2 in (18 × 51 mm)0.86 mm290 mm65Fine detail: vinyl and paper only, weed with care
1.07 × 3 in (27 × 76 mm)1.3 mm435 mm27Vinyl, card and thin sheet
1.43 × 4 in (36 × 102 mm)1.7 mm580 mm14Vinyl, card and thin sheet
2.15 × 6 in (55 × 152 mm)2.6 mm870 mm5Vinyl, card and thin sheet
2.86 × 8 in (73 × 203 mm)3.5 mm1,160 mm3Any material, including 3 mm wood and acrylic
4.3 × 12 in (109 × 305 mm)5.2 mm1,740 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Sports water bottle All 16 water bottles Insulated water bottle with a strap lid →