Free water bottle SVG

Water bottle outline SVG

Water bottle outline, drawn as a line — Water bottle outline. The preview is the SVG file itself.

The slim bottle as an even line: body, neck ring, cap with three ridges and the carry loop, with a band marked near the top and the bottom. For colouring, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	33 × 100 mm (1.31 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	670 mm at this size
Narrowest part	1.9 mm at this size
Nodes	84 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 717 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.33 × 1 in (8 × 25 mm)	0.48 mm	170 mm	220	Too fine for most machines
0.67 × 2 in (17 × 51 mm)	0.97 mm	340 mm	70	Fine detail: vinyl and paper only, weed with care
1 × 3 in (25 × 76 mm)	1.4 mm	511 mm	30	Vinyl, card and thin sheet
1.33 × 4 in (34 × 102 mm)	1.9 mm	681 mm	14	Vinyl, card and thin sheet
2 × 6 in (51 × 152 mm)	2.9 mm	1,021 mm	5	Vinyl, card and thin sheet
2.66 × 8 in (68 × 203 mm)	3.9 mm	1,361 mm	4	Any material, including 3 mm wood and acrylic
4 × 12 in (101 × 305 mm)	5.8 mm	2,042 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More water bottle SVG files

← Water bottle with a carry loop All 16 water bottles Sports water bottle →