Free taco SVG

Split taco for a name SVG

Split taco for a name, as a solid black shape — Split taco for a name. The preview is the SVG file itself.

A taco cut straight across the shell with a clear band about 19 mm tall for a name. Two pieces: the round top with its lettuce and tomato, and the fold of the shell below.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.12 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	12: 2 outer edges and 10 cut-outs
Cut length	841 mm at this size
Narrowest part	2.3 mm at this size
Nodes	184 curve and line segments

Measured from the file. PNG: 2,000 × 1,602 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	0.58 mm	214 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.59 in (51 × 40 mm)	1.2 mm	427 mm	30	Vinyl, card and thin sheet
3 × 2.38 in (76 × 60 mm)	1.8 mm	641 mm	12	Vinyl, card and thin sheet
4 × 3.17 in (102 × 81 mm)	2.3 mm	854 mm	6	Vinyl, card and thin sheet
6 × 4.76 in (152 × 121 mm)	3.5 mm	1,282 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.34 in (203 × 161 mm)	4.7 mm	1,709 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.52 in (305 × 242 mm)	7 mm	2,563 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Taco monogram frame All 15 tacos Taco with a zigzag shell →