Free taco SVG

Taco with lettuce, tomato and cheese SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Taco with lettuce, tomato and cheese, as a solid black shape
Taco with lettuce, tomato and cheese. The preview is the SVG file itself.

A crunchy taco from the side: a speckled half-moon shell with the fold at the bottom, and a frill of lettuce, three slices of tomato and strands of cheese along the open top edge.

What is in the file

Size100 × 72 mm (3.94 × 2.84 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length771 mm at this size
Narrowest part1.3 mm at this size
Nodes148 curve and line segments

Measured from the file. PNG: 2,000 × 1,463 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.33 mm196 mm130Too fine for most machines
2 × 1.44 in (51 × 37 mm)0.66 mm392 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)0.99 mm588 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.88 in (102 × 73 mm)1.3 mm783 mm6Vinyl, card and thin sheet
6 × 4.33 in (152 × 110 mm)2 mm1,175 mm2Vinyl, card and thin sheet
8 × 5.77 in (203 × 147 mm)2.6 mm1,567 mm2Vinyl, card and thin sheet
12 × 8.65 in (305 × 220 mm)4 mm2,350 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Layered taco in four colours All 15 tacos Taco silhouette →