Free taco SVG

Layered taco in four colours SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered taco in four colours, in layered colours
Layered taco in four colours. The preview is the SVG file itself.

Four layers to stack from the back: orange cheese with the whole taco shape as its backing, red tomato, green lettuce and the golden shell in front.

What is in the file

Size100 × 77 mm (3.94 × 3.02 in), scales to any size
Pieces6 separate pieces
Outlines to cut9: 6 outer edges and 3 cut-outs
Cut length1,112 mm at this size
Narrowest part3.5 mm at this size
Nodes167 curve and line segments
Layers4: cheese, tomato, lettuce and shell

Measured from the file. PNG: 2,000 × 1,550 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 19 mm)0.89 mm282 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.53 in (51 × 39 mm)1.8 mm565 mm35Vinyl, card and thin sheet
3 × 2.3 in (76 × 58 mm)2.7 mm847 mm12Vinyl, card and thin sheet
4 × 3.06 in (102 × 78 mm)3.6 mm1,130 mm6Any material, including 3 mm wood and acrylic
6 × 4.6 in (152 × 117 mm)5.3 mm1,695 mm2Any material, including 3 mm wood and acrylic
8 × 6.13 in (203 × 156 mm)7.1 mm2,260 mm1Any material, including 3 mm wood and acrylic
12 × 9.19 in (305 × 233 mm)11 mm3,389 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Three tacos in a row All 15 tacos Taco with lettuce, tomato and cheese →