Free taco SVG

Taco outline SVG

Taco outline, drawn as a line — Taco outline. The preview is the SVG file itself.

A taco in line only, a little over 2 mm wide: the half-moon shell, the frill of lettuce and three slices of tomato above it. For colouring pages, menus and pen plotting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 80 mm (3.94 × 3.14 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	914 mm at this size
Narrowest part	2.1 mm at this size
Nodes	182 curve and line segments

Measured from the file. PNG: 2,000 × 1,612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.8 in (25 × 20 mm)	0.53 mm	232 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.6 in (51 × 41 mm)	1.1 mm	464 mm	30	Vinyl, card and thin sheet
3 × 2.39 in (76 × 61 mm)	1.6 mm	696 mm	12	Vinyl, card and thin sheet
4 × 3.19 in (102 × 81 mm)	2.1 mm	929 mm	6	Vinyl, card and thin sheet
6 × 4.79 in (152 × 122 mm)	3.2 mm	1,393 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.38 in (203 × 162 mm)	4.3 mm	1,857 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.58 in (305 × 243 mm)	6.4 mm	2,786 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Taco silhouette All 15 tacos Empty taco shell →