Free taco SVG

Simple taco with lettuce SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Simple taco with lettuce, as a solid black shape
Simple taco with lettuce. The preview is the SVG file itself.

The plainest taco in the set: a smooth shell and a frill of lettuce, with one curved line following the open edge. Bold enough for small stickers and for children to cut from felt.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length695 mm at this size
Narrowest part3.1 mm at this size
Nodes88 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,287 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.79 mm177 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.26 in (51 × 32 mm)1.6 mm353 mm40Vinyl, card and thin sheet
3 × 1.89 in (76 × 48 mm)2.4 mm530 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)3.1 mm706 mm8Any material, including 3 mm wood and acrylic
6 × 3.77 in (152 × 96 mm)4.7 mm1,059 mm3Any material, including 3 mm wood and acrylic
8 × 5.03 in (203 × 128 mm)6.3 mm1,412 mm2Any material, including 3 mm wood and acrylic
12 × 7.55 in (305 × 192 mm)9.4 mm2,118 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Empty taco shell All 15 tacos Cute taco with a face →