Free taco SVG

Taco heartbeat line SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Taco heartbeat line, as a solid black shape
Taco heartbeat line. The preview is the SVG file itself.

A taco in the middle of a pulse line, with one sharp beat of the trace on each side of it. A long, low design for a shirt front, a mug wrap or an apron.

What is in the file

Size100 × 44 mm (3.94 × 1.74 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length661 mm at this size
Narrowest part1.4 mm at this size
Nodes159 curve and line segments

Measured from the file. PNG: 2,000 × 927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.36 mm168 mm190Too fine for most machines
2 × 0.88 in (51 × 22 mm)0.71 mm336 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.33 in (76 × 34 mm)1.1 mm504 mm21Vinyl, card and thin sheet
4 × 1.77 in (102 × 45 mm)1.4 mm672 mm12Vinyl, card and thin sheet
6 × 2.65 in (152 × 67 mm)2.1 mm1,007 mm4Vinyl, card and thin sheet
8 × 3.54 in (203 × 90 mm)2.8 mm1,343 mm3Vinyl, card and thin sheet
12 × 5.3 in (305 × 135 mm)4.3 mm2,015 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Taco with a lime wedge All 15 tacos Three tacos in a row →