Free taco SVG

Three tacos in a row SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three tacos in a row, as a solid black shape
Three tacos in a row. The preview is the SVG file itself.

Three tacos lined up as they come to the table, each one tucked in front of the last. A slim cut line sets each shell apart, and all three stay joined.

What is in the file

Size100 × 44 mm (3.94 × 1.73 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut35: 1 outer edge and 34 cut-outs
Cut length904 mm at this size
Narrowest part1.1 mm at this size
Nodes258 curve and line segments

Measured from the file. PNG: 2,000 × 923 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.28 mm230 mm190Too fine for most machines
2 × 0.88 in (51 × 22 mm)0.56 mm459 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.32 in (76 × 34 mm)0.84 mm689 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.76 in (102 × 45 mm)1.1 mm918 mm12Vinyl, card and thin sheet
6 × 2.64 in (152 × 67 mm)1.7 mm1,378 mm4Vinyl, card and thin sheet
8 × 3.52 in (203 × 89 mm)2.2 mm1,837 mm3Vinyl, card and thin sheet
12 × 5.28 in (305 × 134 mm)3.4 mm2,755 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More taco SVG files

← Taco heartbeat line All 15 tacos Layered taco in four colours →