Free swirl SVG

Set of six swirls SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Set of six swirls, as a solid black shape
Set of six swirls. The preview is the SVG file itself.

Six small swirls on one sheet: a single, a double, a twin, a three-armed one, a C-shaped pair and a swirly line. Loose pieces to ungroup and scatter.

What is in the file

Size100 × 82 mm (3.94 × 3.22 in), scales to any size
Pieces6 separate pieces
Outlines to cut7: 6 outer edges and 1 cut-out
Cut length1,342 mm at this size
Narrowest part1.2 mm at this size
Nodes385 curve and line segments

Measured from the file. PNG: 2,000 × 1,648 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.3 mm341 mm120Too fine for most machines
2 × 1.63 in (51 × 42 mm)0.61 mm682 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.45 in (76 × 62 mm)0.91 mm1,023 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.27 in (102 × 83 mm)1.2 mm1,363 mm6Vinyl, card and thin sheet
6 × 4.9 in (152 × 125 mm)1.8 mm2,045 mm2Vinyl, card and thin sheet
8 × 6.54 in (203 × 166 mm)2.4 mm2,727 mm1Vinyl, card and thin sheet
12 × 9.8 in (305 × 249 mm)3.7 mm4,090 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More swirl SVG files

← Swirl arch All 15 swirls Single swirl →