Free swirl SVG

Swirl arch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Swirl arch, as a solid black shape
Swirl arch. The preview is the SVG file itself.

A shallow arch with three curls rising from each side and a spiral at each end, made to sit over a name or a short line of text.

What is in the file

Size100 × 42 mm (3.94 × 1.65 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length675 mm at this size
Narrowest part2.1 mm at this size
Nodes186 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 885 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.42 in (25 × 11 mm)0.53 mm171 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.84 in (51 × 21 mm)1.1 mm343 mm55Vinyl, card and thin sheet
3 × 1.26 in (76 × 32 mm)1.6 mm514 mm24Vinyl, card and thin sheet
4 × 1.68 in (102 × 43 mm)2.1 mm686 mm12Vinyl, card and thin sheet
6 × 2.52 in (152 × 64 mm)3.2 mm1,029 mm4Any material, including 3 mm wood and acrylic
8 × 3.36 in (203 × 85 mm)4.3 mm1,372 mm3Any material, including 3 mm wood and acrylic
12 × 5.04 in (305 × 128 mm)6.4 mm2,057 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More swirl SVG files

← Swirl corner All 15 swirls Set of six swirls →