Swirl corner SVG
Three swirls fanning out of a corner: one along each edge and a larger one on the diagonal between them. Turn copies to dress all four corners of a page.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 919 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 125 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.79 mm | 233 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.6 mm | 467 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 2.4 mm | 700 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 3.1 mm | 934 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 4.7 mm | 1,401 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 6.3 mm | 1,867 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 9.4 mm | 2,801 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Swirl arch 
Set of six swirls 
Single swirl 
Rounded double swirl 
Three-armed swirl 
Twin swirl on a stem 
Sprig of three swirls 
Swirly line with a loop 