Free swirl SVG

Single swirl SVG

Single swirl, as a solid black shape — Single swirl. The preview is the SVG file itself.

One bold swirl: two turns of spiral with a ball in its eye, unwinding into a tail that thins to a point. Flip it or turn it and it becomes a wave, a tendril or a puff of smoke.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.33 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	569 mm at this size
Narrowest part	3.2 mm at this size
Nodes	63 curve and line segments

Measured from the file. PNG: 2,000 × 1,215 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.81 mm	145 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)	1.6 mm	289 mm	40	Vinyl, card and thin sheet
3 × 1.78 in (76 × 45 mm)	2.4 mm	434 mm	18	Vinyl, card and thin sheet
4 × 2.37 in (102 × 60 mm)	3.3 mm	578 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.55 in (152 × 90 mm)	4.9 mm	867 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.74 in (203 × 120 mm)	6.5 mm	1,156 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.1 in (305 × 180 mm)	9.8 mm	1,734 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More swirl SVG files

← Set of six swirls All 15 swirls Rounded double swirl →