Wind swirl with three gusts SVG
Three gusts of wind: each starts as a fine point, thickens and curls over at the end, two downwards and one up. The three lines are separate pieces.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 68 mm (3.94 × 2.68 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 4: 3 outer edges and 1 cut-out |
| Cut length | 704 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 113 curve and line segments |
Measured from the file. PNG: 2,000 × 1,385 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.68 in (25 × 17 mm) | 0.61 mm | 179 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.36 in (51 × 35 mm) | 1.2 mm | 358 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.04 in (76 × 52 mm) | 1.8 mm | 536 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.72 in (102 × 69 mm) | 2.4 mm | 715 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.08 in (152 × 104 mm) | 3.7 mm | 1,073 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.44 in (203 × 138 mm) | 4.9 mm | 1,431 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.16 in (305 × 207 mm) | 7.3 mm | 2,146 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Heart swirl 
Swirl frame 
Swirl border 
Candy swirl 
Swirl lollipop 
Swirl corner 
Swirl arch 
Set of six swirls 