Swirl border SVG
A straight line with eight curls springing from it, up and down by turns, 12.5 mm apart. The ends are square, so copies join end to end.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 26 mm (3.94 × 1 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 608 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 170 curve and line segments |
Measured from the file. PNG: 2,000 × 567 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.26 in (25 × 6 mm) | 0.53 mm | 154 mm | 260 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.51 in (51 × 13 mm) | 1.1 mm | 309 mm | 85 | Vinyl, card and thin sheet |
| 3 × 0.76 in (76 × 19 mm) | 1.6 mm | 463 mm | 36 | Vinyl, card and thin sheet |
| 4 × 1.02 in (102 × 26 mm) | 2.1 mm | 618 mm | 20 | Vinyl, card and thin sheet |
| 6 × 1.53 in (152 × 39 mm) | 3.2 mm | 927 mm | 7 | Any material, including 3 mm wood and acrylic |
| 8 × 2.04 in (203 × 52 mm) | 4.3 mm | 1,235 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.06 in (305 × 78 mm) | 6.4 mm | 1,853 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Candy swirl 
Swirl lollipop 
Swirl corner 
Swirl arch 
Set of six swirls 
Single swirl 
Rounded double swirl 
Three-armed swirl 