Heart swirl SVG
A heart drawn with two strokes that part at the notch, cross at the point and curl away into a spiral on each side. One piece, for wedding and Valentine designs.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 99 mm (3.94 × 3.91 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 936 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 129 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,985 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.99 in (25 × 25 mm) | 0.74 mm | 238 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.98 in (51 × 50 mm) | 1.5 mm | 475 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.98 in (76 × 76 mm) | 2.2 mm | 713 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.97 in (102 × 101 mm) | 2.9 mm | 951 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.95 in (152 × 151 mm) | 4.4 mm | 1,426 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 7.94 in (203 × 202 mm) | 5.9 mm | 1,902 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.9 in (305 × 302 mm) | 8.8 mm | 2,853 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Swirl frame 
Swirl border 
Candy swirl 
Swirl lollipop 
Swirl corner 
Swirl arch 
Set of six swirls 
Single swirl 