Twin swirl on a stem SVG
A stem that divides into two arms which curl outwards and down into matching spirals, like the head of a fern or a pair of ram’s horns.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.6 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 599 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 99 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.66 mm | 152 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.32 in (51 × 34 mm) | 1.3 mm | 304 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.98 in (76 × 50 mm) | 2 mm | 456 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.64 in (102 × 67 mm) | 2.6 mm | 609 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.96 in (152 × 101 mm) | 4 mm | 913 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.28 in (203 × 134 mm) | 5.3 mm | 1,217 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.92 in (305 × 201 mm) | 7.9 mm | 1,826 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Sprig of three swirls 
Swirly line with a loop 
Wind swirl with three gusts 
Heart swirl 
Swirl frame 
Swirl border 
Candy swirl 
Swirl lollipop 