Sprig of three swirls SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A curling tendril with one large swirl at its tip and two smaller ones branching off, one to each side. A corner filler for cards and a tail for lettering.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.56 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 802 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 127 curve and line segments |
| Also found as | Decorative swirls SVG |
Measured from the file. PNG: 2,000 × 1,813 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.79 mm | 204 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.81 in (51 × 46 mm) | 1.6 mm | 407 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.71 in (76 × 69 mm) | 2.4 mm | 611 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.61 in (102 × 92 mm) | 3.1 mm | 815 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.42 in (152 × 138 mm) | 4.7 mm | 1,222 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.22 in (203 × 183 mm) | 6.3 mm | 1,630 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.84 in (305 × 275 mm) | 9.4 mm | 2,444 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More swirl SVG files
-
Swirly line with a loop Solid · one piece
-
Wind swirl with three gusts Solid · 3 pieces
-
Heart swirl Solid · one piece
-
Swirl frame Solid · one piece
-
Swirl border Solid · one piece
-
Candy swirl Solid · one piece
-
Swirl lollipop Solid · one piece
-
Swirl corner Solid · one piece
← Twin swirl on a stem All 15 swirls Swirly line with a loop →