Round scroll engraving medallion SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four leafy scrolls leave a small ring at the centre, wind the same way round and run into a plain rim, with a pointed leaf between each pair. For coasters, lids, pocket watch backs and round tags.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 1,858 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 683 curve and line segments |
| Symmetry | 4-fold rotation |
| Also found as | Scroll designs for engraving SVG |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.51 mm | 472 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1 mm | 944 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 1.5 mm | 1,416 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 2 mm | 1,888 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 3 mm | 2,832 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 4.1 mm | 3,775 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 6.1 mm | 5,663 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scroll engraving SVG files
-
Upright scroll ornament in three tiers Solid · one piece -
Scroll engraving set of four Solid · 4 pieces -
Acanthus leaf for scroll engraving Solid · one piece -
Scroll engraving template in outline Outline · one piece -
Single engraving scroll with leaves Solid · one piece -
S-scroll with leaves for engraving Solid · one piece -
C-scroll with leaves on an arch Solid · one piece -
Running scroll engraving border Solid · one piece
← Split scroll for a name All 16 scroll engraving patterns Upright scroll ornament in three tiers →