Single engraving scroll with leaves SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
One large scroll joined by a straight stem to a small one at its foot that winds the other way. The large coil turns in for a turn and a half to a bud, with curling leaves inside that shrink towards the centre and four pointed leaves outside.
What is in the file
| Size | 89 × 100 mm (3.52 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 962 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 445 curve and line segments |
Measured from the file. PNG: 1,796 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.89 × 1 in (23 × 25 mm) | 0.53 mm | 244 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.79 × 2 in (45 × 51 mm) | 1.1 mm | 489 mm | 30 | Vinyl, card and thin sheet |
| 2.68 × 3 in (68 × 76 mm) | 1.6 mm | 733 mm | 12 | Vinyl, card and thin sheet |
| 3.58 × 4 in (91 × 102 mm) | 2.1 mm | 977 mm | 6 | Vinyl, card and thin sheet |
| 5.36 × 6 in (136 × 152 mm) | 3.2 mm | 1,466 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.15 × 8 in (182 × 203 mm) | 4.3 mm | 1,955 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.73 × 12 in (272 × 305 mm) | 6.4 mm | 2,932 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scroll engraving SVG files
-
S-scroll with leaves for engraving Solid · one piece -
C-scroll with leaves on an arch Solid · one piece -
Running scroll engraving border Solid · one piece -
Scroll band between two rails Solid · one piece -
Corner scroll engraving pattern Solid · one piece -
Scroll engraving panel with a palmette Solid · one piece -
English scroll engraving pattern Solid · one piece -
Scroll frame with an oval centre Solid · one piece
← Scroll engraving template in outline All 16 scroll engraving patterns S-scroll with leaves for engraving →