C-scroll with leaves on an arch SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two scrolls that face each other at the ends of one arched stem, with six leaves along the back of the arch and a pointed bud at its crown. Use it over a name or as the top of a frame.
What is in the file
| Size | 100 × 55 mm (3.94 × 2.18 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 708 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 339 curve and line segments |
| Symmetry | Mirror |
| Also found as | Leaf scroll SVG |
Measured from the file. PNG: 2,000 × 1,140 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.55 in (25 × 14 mm) | 0.48 mm | 180 mm | 160 | Too fine for most machines |
| 2 × 1.11 in (51 × 28 mm) | 0.97 mm | 360 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.66 in (76 × 42 mm) | 1.4 mm | 539 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.21 in (102 × 56 mm) | 1.9 mm | 719 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.32 in (152 × 84 mm) | 2.9 mm | 1,079 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.42 in (203 × 112 mm) | 3.9 mm | 1,439 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.64 in (305 × 169 mm) | 5.8 mm | 2,158 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scroll engraving SVG files
-
Running scroll engraving border Solid · one piece -
Scroll band between two rails Solid · one piece -
Corner scroll engraving pattern Solid · one piece -
Scroll engraving panel with a palmette Solid · one piece -
English scroll engraving pattern Solid · one piece -
Scroll frame with an oval centre Solid · one piece -
Baroque scroll cartouche Solid · one piece -
Split scroll for a name Solid · one piece
← S-scroll with leaves for engraving All 16 scroll engraving patterns Running scroll engraving border →