Free scroll engraving SVG

Split scroll for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Split scroll for a name, as a solid black shape
Split scroll for a name. The preview is the SVG file itself.

A crest of scrolls above a clear band and its mirror image below, with a bar along each side of the band and a post at each end, so the whole frame is one piece.

What is in the file

Size100 × 70 mm (3.94 × 2.76 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length1,620 mm at this size
Narrowest part1 mm at this size
Nodes676 curve and line segments
Symmetry2-fold rotation and mirror

Measured from the file. PNG: 2,000 × 1,423 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.25 mm411 mm130Too fine for most machines
2 × 1.4 in (51 × 36 mm)0.51 mm823 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.1 in (76 × 53 mm)0.76 mm1,234 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.8 in (102 × 71 mm)1 mm1,646 mm8Vinyl, card and thin sheet
6 × 4.2 in (152 × 107 mm)1.5 mm2,469 mm2Vinyl, card and thin sheet
8 × 5.6 in (203 × 142 mm)2 mm3,292 mm2Vinyl, card and thin sheet
12 × 8.4 in (305 × 213 mm)3 mm4,938 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scroll engraving SVG files

← Baroque scroll cartouche All 16 scroll engraving patterns Round scroll engraving medallion →