Upright scroll ornament in three tiers SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A central stem on a small foot with three pairs of scrolls, large at the bottom and small at the top, and a leaf bud at the tip. For tall narrow spaces such as handles, spines and door panels.
What is in the file
| Size | 59 × 100 mm (2.31 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 1,174 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 628 curve and line segments |
| Symmetry | Mirror |
| Also found as | Laser engrave scrollwork SVG |
Measured from the file. PNG: 1,208 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.59 × 1 in (15 × 25 mm) | 0.51 mm | 298 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 1.18 × 2 in (30 × 51 mm) | 1 mm | 596 mm | 40 | Vinyl, card and thin sheet |
| 1.76 × 3 in (45 × 76 mm) | 1.5 mm | 895 mm | 18 | Vinyl, card and thin sheet |
| 2.35 × 4 in (60 × 102 mm) | 2 mm | 1,193 mm | 8 | Vinyl, card and thin sheet |
| 3.53 × 6 in (90 × 152 mm) | 3 mm | 1,789 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.7 × 8 in (119 × 203 mm) | 4.1 mm | 2,386 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.06 × 12 in (179 × 305 mm) | 6.1 mm | 3,578 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scroll engraving SVG files
-
Scroll engraving set of four Solid · 4 pieces -
Acanthus leaf for scroll engraving Solid · one piece -
Scroll engraving template in outline Outline · one piece -
Single engraving scroll with leaves Solid · one piece -
S-scroll with leaves for engraving Solid · one piece -
C-scroll with leaves on an arch Solid · one piece -
Running scroll engraving border Solid · one piece -
Scroll band between two rails Solid · one piece
← Round scroll engraving medallion All 16 scroll engraving patterns Scroll engraving set of four →