Free scroll engraving SVG

Running scroll engraving border SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Running scroll engraving border, as a solid black shape
Running scroll engraving border. The preview is the SVG file itself.

Four leafy scrolls in a row, one above the stem and the next below it, each winding the opposite way to its neighbour. The ends are cut square so copies join end to end.

What is in the file

Size100 × 33 mm (3.94 × 1.3 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length911 mm at this size
Narrowest part2 mm at this size
Nodes397 curve and line segments

Measured from the file. PNG: 2,000 × 710 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)0.51 mm231 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.66 in (51 × 17 mm)1 mm463 mm70Vinyl, card and thin sheet
3 × 0.99 in (76 × 25 mm)1.5 mm694 mm30Vinyl, card and thin sheet
4 × 1.32 in (102 × 33 mm)2 mm926 mm16Vinyl, card and thin sheet
6 × 1.97 in (152 × 50 mm)3 mm1,388 mm5Any material, including 3 mm wood and acrylic
8 × 2.63 in (203 × 67 mm)4.1 mm1,851 mm4Any material, including 3 mm wood and acrylic
12 × 3.95 in (305 × 100 mm)6.1 mm2,777 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scroll engraving SVG files

← C-scroll with leaves on an arch All 16 scroll engraving patterns Scroll band between two rails →