Free scroll engraving SVG

Corner scroll engraving pattern SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Corner scroll engraving pattern, as a solid black shape
Corner scroll engraving pattern. The preview is the SVG file itself.

Two arms leave the corner along its edges, each with a large scroll, a smaller one and a curl at the end, and a pointed leaf lies on the diagonal between them. Drawn for the top left; turn copies for the other corners.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,296 mm at this size
Narrowest part1 mm at this size
Nodes547 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm329 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm658 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm988 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm1,317 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm1,975 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm2,633 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm3,950 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scroll engraving SVG files

← Scroll band between two rails All 16 scroll engraving patterns Scroll engraving panel with a palmette →