Scroll engraving panel with a palmette SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wide symmetrical panel: two large scrolls rise either side of a tall pointed leaf, a smaller scroll winds the other way beyond each, and three small leaves hang below the base. For box lids, plaques and the back of a watch case.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.34 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 1,117 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 543 curve and line segments |
| Symmetry | Mirror |
| Also found as | Scroll engraving patterns SVG |
Measured from the file. PNG: 2,000 × 1,221 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.51 mm | 284 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.19 in (51 × 30 mm) | 1 mm | 567 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.78 in (76 × 45 mm) | 1.5 mm | 851 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.38 in (102 × 60 mm) | 2 mm | 1,135 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.57 in (152 × 91 mm) | 3 mm | 1,702 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.76 in (203 × 121 mm) | 4.1 mm | 2,270 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.14 in (305 × 181 mm) | 6.1 mm | 3,405 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scroll engraving SVG files
-
English scroll engraving pattern Solid · one piece -
Scroll frame with an oval centre Solid · one piece -
Baroque scroll cartouche Solid · one piece -
Split scroll for a name Solid · one piece -
Round scroll engraving medallion Solid · one piece -
Upright scroll ornament in three tiers Solid · one piece -
Scroll engraving set of four Solid · 4 pieces -
Acanthus leaf for scroll engraving Solid · one piece
← Corner scroll engraving pattern All 16 scroll engraving patterns English scroll engraving pattern →