Free scroll engraving SVG

Scroll engraving set of four SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Scroll engraving set of four, as a solid black shape
Scroll engraving set of four. The preview is the SVG file itself.

Four ornaments on one sheet as loose pieces: an S-scroll, an arched C-scroll, and a single scroll with its mirror image to stand either side of a name. Ungroup them in your software and use each alone.

What is in the file

Size100 × 91 mm (3.94 × 3.57 in), scales to any size
Pieces4 separate pieces
Outlines to cut16: 4 outer edges and 12 cut-outs
Cut length1,540 mm at this size
Narrowest part1 mm at this size
Nodes1,013 curve and line segments

Measured from the file. PNG: 2,000 × 1,821 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.25 mm391 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.51 mm782 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.72 in (76 × 69 mm)0.76 mm1,173 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.63 in (102 × 92 mm)1 mm1,565 mm6Vinyl, card and thin sheet
6 × 5.44 in (152 × 138 mm)1.5 mm2,347 mm2Vinyl, card and thin sheet
8 × 7.26 in (203 × 184 mm)2 mm3,129 mm1Vinyl, card and thin sheet
12 × 10.88 in (305 × 276 mm)3 mm4,694 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scroll engraving SVG files

← Upright scroll ornament in three tiers All 16 scroll engraving patterns Acanthus leaf for scroll engraving →