Neck scarf with a knot SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A neckerchief tied at the front: a curved band round the neck, a square knot and two pointed ends with three spots on each. Exactly mirrored. Lay it on an animal, a snowman or a monogram.
What is in the file
| Size | 100 × 86 mm (3.94 × 3.37 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 653 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 85 curve and line segments |
| Symmetry | Mirror |
| Also found as | Bandana scarf SVG |
Measured from the file. PNG: 2,000 × 1,721 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.86 in (25 × 22 mm) | 0.84 mm | 166 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.71 in (51 × 43 mm) | 1.7 mm | 332 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.57 in (76 × 65 mm) | 2.5 mm | 498 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.42 in (102 × 87 mm) | 3.4 mm | 663 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.13 in (152 × 130 mm) | 5 mm | 995 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.84 in (203 × 174 mm) | 6.7 mm | 1,327 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.26 in (305 × 261 mm) | 10 mm | 1,990 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scarf SVG files
-
Scarf and bobble hat set Solid · 2 pieces -
Scarf outline Outline · one piece -
Layered scarf in three colours Layered · 19 pieces -
Knitted scarf looped at the neck Solid · one piece -
Simple scarf with one end Solid · one piece -
Wrapped scarf wound three times Solid · one piece -
Long striped scarf Solid · one piece -
Check scarf hanging on a peg rail Solid · one piece
← Bandana scarf folded in a triangle All 13 scarves Scarf and bobble hat set →