Free scarf SVG

Simple scarf with one end SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Simple scarf with one end, as a solid black shape
Simple scarf with one end. The preview is the SVG file itself.

The scarf at its plainest: a rounded wrap with one fold line and a single broad end with two stripes and five tassels. Bold enough for a child’s peg label or a sticker 25 mm tall.

What is in the file

Size65 × 100 mm (2.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length589 mm at this size
Narrowest part3.1 mm at this size
Nodes62 curve and line segments

Measured from the file. PNG: 1,333 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.65 × 1 in (17 × 25 mm)0.79 mm150 mm140Fine detail: vinyl and paper only, weed with care
1.31 × 2 in (33 × 51 mm)1.6 mm299 mm40Vinyl, card and thin sheet
1.96 × 3 in (50 × 76 mm)2.4 mm449 mm15Vinyl, card and thin sheet
2.61 × 4 in (66 × 102 mm)3.1 mm598 mm8Any material, including 3 mm wood and acrylic
3.92 × 6 in (100 × 152 mm)4.7 mm898 mm2Any material, including 3 mm wood and acrylic
5.22 × 8 in (133 × 203 mm)6.3 mm1,197 mm2Any material, including 3 mm wood and acrylic
7.84 × 12 in (199 × 305 mm)9.4 mm1,795 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarf SVG files

← Knitted scarf looped at the neck All 13 scarves Wrapped scarf wound three times →