Free scarf SVG

Scarf tied in a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Scarf tied in a heart, as a solid black shape
Scarf tied in a heart. The preview is the SVG file itself.

A scarf looped into the outline of a heart and knotted at the point, with its two striped ends and their tassels spreading out below. Exactly mirrored. For winter weddings and valentines.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length887 mm at this size
Narrowest part2.9 mm at this size
Nodes130 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,685 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.74 mm225 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.5 mm451 mm30Vinyl, card and thin sheet
2.51 × 3 in (64 × 76 mm)2.2 mm676 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)2.9 mm901 mm6Vinyl, card and thin sheet
5.02 × 6 in (127 × 152 mm)4.4 mm1,352 mm2Any material, including 3 mm wood and acrylic
6.69 × 8 in (170 × 203 mm)5.9 mm1,802 mm1Any material, including 3 mm wood and acrylic
10.03 × 12 in (255 × 305 mm)8.8 mm2,704 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarf SVG files

← Supporter scarf with a blank middle All 13 scarves Bandana scarf folded in a triangle →