Layered scarf in three colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three layers to stack, tipped to one side: the looped scarf in red, cream for the stripes on both ends, and navy for the tassels. Cut each from its own sheet and build up from the back.
What is in the file
| Size | 66 × 100 mm (2.61 × 3.94 in), scales to any size |
|---|---|
| Pieces | 19 separate pieces |
| Outlines to cut | 19 outlines |
| Cut length | 957 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 129 curve and line segments |
| Layers | 3: scarf, stripes and tassels |
Measured from the file. PNG: 1,352 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | Over 1.5 mm | 243 mm | 140 | Vinyl, card and thin sheet |
| 1.33 × 2 in (34 × 51 mm) | Over 3 mm | 486 mm | 35 | Any material, including 3 mm wood and acrylic |
| 1.99 × 3 in (51 × 76 mm) | Over 4.6 mm | 729 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.65 × 4 in (67 × 102 mm) | Over 6.1 mm | 972 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.98 × 6 in (101 × 152 mm) | Over 9.1 mm | 1,458 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.3 × 8 in (135 × 203 mm) | Over 12 mm | 1,945 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.96 × 12 in (202 × 305 mm) | Over 18 mm | 2,917 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scarf SVG files
-
Knitted scarf looped at the neck Solid · one piece -
Simple scarf with one end Solid · one piece -
Wrapped scarf wound three times Solid · one piece -
Long striped scarf Solid · one piece -
Check scarf hanging on a peg rail Solid · one piece -
Snowman scarf blowing in the wind Solid · one piece -
Supporter scarf with a blank middle Solid · one piece -
Scarf tied in a heart Solid · one piece
← Scarf outline All 13 scarves Knitted scarf looped at the neck →