Free scarf SVG

Wrapped scarf wound three times SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wrapped scarf wound three times, as a solid black shape
Wrapped scarf wound three times. The preview is the SVG file itself.

A chunky scarf wound three times round the neck, each turn lying over the one below, with one striped end hanging in front and the other tucked up at the top. For cold weather posters.

What is in the file

Size77 × 100 mm (3.03 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length785 mm at this size
Narrowest part2.6 mm at this size
Nodes122 curve and line segments

Measured from the file. PNG: 1,558 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.66 mm199 mm120Fine detail: vinyl and paper only, weed with care
1.54 × 2 in (39 × 51 mm)1.3 mm399 mm35Vinyl, card and thin sheet
2.31 × 3 in (59 × 76 mm)2 mm598 mm12Vinyl, card and thin sheet
3.08 × 4 in (78 × 102 mm)2.6 mm798 mm6Vinyl, card and thin sheet
4.62 × 6 in (117 × 152 mm)4 mm1,196 mm2Any material, including 3 mm wood and acrylic
6.16 × 8 in (156 × 203 mm)5.3 mm1,595 mm1Any material, including 3 mm wood and acrylic
9.24 × 12 in (235 × 305 mm)7.9 mm2,393 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarf SVG files

← Simple scarf with one end All 13 scarves Long striped scarf →