Long striped scarf SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A long scarf laid out in a loose S, with nine open stripes spaced along it and a fringe at each end. A good border along the bottom of a winter poster or across a knitting club sign.
What is in the file
| Size | 100 × 86 mm (3.94 × 3.37 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 746 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 126 curve and line segments |
Measured from the file. PNG: 2,000 × 1,725 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.86 in (25 × 22 mm) | 0.64 mm | 189 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.71 in (51 × 44 mm) | 1.3 mm | 379 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.57 in (76 × 65 mm) | 1.9 mm | 568 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.43 in (102 × 87 mm) | 2.5 mm | 758 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.14 in (152 × 131 mm) | 3.8 mm | 1,137 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.86 in (203 × 174 mm) | 5.1 mm | 1,516 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.28 in (305 × 261 mm) | 7.6 mm | 2,274 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scarf SVG files
-
Check scarf hanging on a peg rail Solid · one piece -
Snowman scarf blowing in the wind Solid · one piece -
Supporter scarf with a blank middle Solid · one piece -
Scarf tied in a heart Solid · one piece -
Bandana scarf folded in a triangle Solid · one piece -
Neck scarf with a knot Solid · one piece -
Scarf and bobble hat set Solid · 2 pieces -
Scarf outline Outline · one piece
← Wrapped scarf wound three times All 13 scarves Check scarf hanging on a peg rail →