Scarf and bobble hat set SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two loose pieces that belong together: a bobble hat with a zigzag band and a ribbed brim, and the looped scarf below it. Slide them apart to frame a face, a photo or an initial.
What is in the file
| Size | 31 × 100 mm (1.22 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 17: 2 outer edges and 15 cut-outs |
| Cut length | 710 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 164 curve and line segments |
| Also found as | Winter hat SVG |
Measured from the file. PNG: 673 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.31 × 1 in (8 × 25 mm) | 0.38 mm | 180 mm | 230 | Too fine for most machines |
| 0.62 × 2 in (16 × 51 mm) | 0.76 mm | 361 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 0.93 × 3 in (24 × 76 mm) | 1.1 mm | 541 mm | 30 | Vinyl, card and thin sheet |
| 1.24 × 4 in (31 × 102 mm) | 1.5 mm | 721 mm | 16 | Vinyl, card and thin sheet |
| 1.86 × 6 in (47 × 152 mm) | 2.3 mm | 1,082 mm | 5 | Vinyl, card and thin sheet |
| 2.48 × 8 in (63 × 203 mm) | 3 mm | 1,443 mm | 4 | Any material, including 3 mm wood and acrylic |
| 3.72 × 12 in (94 × 305 mm) | 4.6 mm | 2,164 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More scarf SVG files
-
Scarf outline Outline · one piece -
Layered scarf in three colours Layered · 19 pieces -
Knitted scarf looped at the neck Solid · one piece -
Simple scarf with one end Solid · one piece -
Wrapped scarf wound three times Solid · one piece -
Long striped scarf Solid · one piece -
Check scarf hanging on a peg rail Solid · one piece -
Snowman scarf blowing in the wind Solid · one piece