Free scarf SVG

Knitted scarf looped at the neck SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Knitted scarf looped at the neck, as a solid black shape
Knitted scarf looped at the neck. The preview is the SVG file itself.

A scarf as it sits when worn: a loop round the neck and two ends hanging in front, one over the other, each with open stripes and a fringe of five tassels. One piece, for winter cards and coat peg labels.

What is in the file

Size59 × 100 mm (2.31 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length827 mm at this size
Narrowest part2.9 mm at this size
Nodes112 curve and line segments

Measured from the file. PNG: 1,208 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.59 × 1 in (15 × 25 mm)0.74 mm210 mm150Fine detail: vinyl and paper only, weed with care
1.18 × 2 in (30 × 51 mm)1.5 mm420 mm40Vinyl, card and thin sheet
1.76 × 3 in (45 × 76 mm)2.2 mm630 mm18Vinyl, card and thin sheet
2.35 × 4 in (60 × 102 mm)2.9 mm840 mm8Vinyl, card and thin sheet
3.53 × 6 in (90 × 152 mm)4.4 mm1,260 mm3Any material, including 3 mm wood and acrylic
4.7 × 8 in (119 × 203 mm)5.9 mm1,680 mm2Any material, including 3 mm wood and acrylic
7.06 × 12 in (179 × 305 mm)8.8 mm2,521 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More scarf SVG files

← Layered scarf in three colours All 13 scarves Simple scarf with one end →