Santa’s Little Helper in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Santa’s Little Helper” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 91 mm (3.94 × 3.59 in), scales to any size |
|---|---|
| Pieces | 20 separate pieces |
| Outlines to cut | 26: 20 outer edges and 6 cut-outs |
| Cut length | 1,434 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 645 curve and line segments |
Measured from the file. PNG: 2,000 × 1,831 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.91 in (25 × 23 mm) | 0.69 mm | 364 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.82 in (51 × 46 mm) | 1.4 mm | 728 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.74 in (76 × 69 mm) | 2.1 mm | 1,093 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.65 in (102 × 93 mm) | 2.7 mm | 1,457 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.47 in (152 × 139 mm) | 4.1 mm | 2,185 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.3 in (203 × 185 mm) | 5.5 mm | 2,914 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.94 in (305 × 278 mm) | 8.2 mm | 4,371 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper in Amatic SC Solid · 19 pieces -
Santa’s Little Helper in block capitals Solid · 19 pieces -
Santa’s Little Helper in script and capitals Solid · 16 pieces -
Santa’s Little Helper with stars Solid · 16 pieces -
Santa’s Little Helper outline lettering Outline · 21 pieces -
Santa’s Little Helper stencil plate Solid · one piece -
Santa’s Little Helper with a drop shadow Layered · 12 pieces -
Santa’s Little Helper in Pacifico Solid · 8 pieces
← Santa’s Little Helper in Lilita One All 12 Santa’s Little Helper designs Santa’s Little Helper in Amatic SC →