Santa’s Little Helper with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Santa’s Little Helper” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 70 × 100 mm (2.77 × 3.94 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 37: 12 outer edges and 25 cut-outs |
| Cut length | 1,914 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 651 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 1,429 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.7 × 1 in (18 × 25 mm) | 0.36 mm | 486 mm | 130 | Too fine for most machines |
| 1.41 × 2 in (36 × 51 mm) | 0.71 mm | 972 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.11 × 3 in (54 × 76 mm) | 1.1 mm | 1,458 mm | 15 | Vinyl, card and thin sheet |
| 2.81 × 4 in (71 × 102 mm) | 1.4 mm | 1,945 mm | 8 | Vinyl, card and thin sheet |
| 4.22 × 6 in (107 × 152 mm) | 2.1 mm | 2,917 mm | 2 | Vinyl, card and thin sheet |
| 5.62 × 8 in (143 × 203 mm) | 2.8 mm | 3,889 mm | 2 | Vinyl, card and thin sheet |
| 8.44 × 12 in (214 × 305 mm) | 4.3 mm | 5,834 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper with a Santa hat Solid · 17 pieces
-
Santa’s Little Helper in Pacifico Solid · 8 pieces
-
Santa’s Little Helper in Lobster Solid · 10 pieces
-
Santa’s Little Helper in Kaushan Script Solid · 20 pieces
-
Santa’s Little Helper in Lilita One Solid · 20 pieces
-
Santa’s Little Helper in Alfa Slab One Solid · 20 pieces
-
Santa’s Little Helper in Amatic SC Solid · 19 pieces
-
Santa’s Little Helper in block capitals Solid · 19 pieces
← Santa’s Little Helper stencil plate All 13 Santa’s Little Helper designs Santa’s Little Helper with a Santa hat →