Santa’s Little Helper with a Santa hat SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Santa’s Little Helper” with a Santa hat above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.
What is in the file
| Size | 58 × 100 mm (2.28 × 3.94 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 23: 17 outer edges and 6 cut-outs |
| Cut length | 1,327 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 324 curve and line segments |
Measured from the file. PNG: 1,188 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.58 × 1 in (15 × 25 mm) | 0.28 mm | 337 mm | 150 | Too fine for most machines |
| 1.16 × 2 in (29 × 51 mm) | 0.56 mm | 674 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 1.73 × 3 in (44 × 76 mm) | 0.84 mm | 1,011 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 2.31 × 4 in (59 × 102 mm) | 1.1 mm | 1,348 mm | 8 | Vinyl, card and thin sheet |
| 3.47 × 6 in (88 × 152 mm) | 1.7 mm | 2,022 mm | 3 | Vinyl, card and thin sheet |
| 4.62 × 8 in (117 × 203 mm) | 2.2 mm | 2,696 mm | 2 | Vinyl, card and thin sheet |
| 6.94 × 12 in (176 × 305 mm) | 3.4 mm | 4,045 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper in Pacifico Solid · 8 pieces -
Santa’s Little Helper in Lobster Solid · 10 pieces -
Santa’s Little Helper in Kaushan Script Solid · 20 pieces -
Santa’s Little Helper in Lilita One Solid · 20 pieces -
Santa’s Little Helper in Alfa Slab One Solid · 20 pieces -
Santa’s Little Helper in Amatic SC Solid · 19 pieces -
Santa’s Little Helper in block capitals Solid · 19 pieces -
Santa’s Little Helper in script and capitals Solid · 16 pieces
← Santa’s Little Helper with a drop shadow All 13 Santa’s Little Helper designs Santa’s Little Helper in Pacifico →