Santa’s Little Helper in block capitals SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“SANTA’S LITTLE HELPER” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.
What is in the file
| Size | 91 × 100 mm (3.57 × 3.94 in), scales to any size |
|---|---|
| Pieces | 19 separate pieces |
| Outlines to cut | 23: 19 outer edges and 4 cut-outs |
| Cut length | 1,940 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 226 curve and line segments |
Measured from the file. PNG: 1,819 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.91 × 1 in (23 × 25 mm) | 0.81 mm | 493 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.81 × 2 in (46 × 51 mm) | 1.6 mm | 986 mm | 30 | Vinyl, card and thin sheet |
| 2.72 × 3 in (69 × 76 mm) | 2.4 mm | 1,478 mm | 12 | Vinyl, card and thin sheet |
| 3.62 × 4 in (92 × 102 mm) | 3.3 mm | 1,971 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.44 × 6 in (138 × 152 mm) | 4.9 mm | 2,957 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.25 × 8 in (184 × 203 mm) | 6.5 mm | 3,942 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.87 × 12 in (276 × 305 mm) | 9.8 mm | 5,913 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper in script and capitals Solid · 16 pieces -
Santa’s Little Helper with stars Solid · 16 pieces -
Santa’s Little Helper outline lettering Outline · 21 pieces -
Santa’s Little Helper stencil plate Solid · one piece -
Santa’s Little Helper with a drop shadow Layered · 12 pieces -
Santa’s Little Helper in Pacifico Solid · 8 pieces -
Santa’s Little Helper in Lobster Solid · 10 pieces -
Santa’s Little Helper in Kaushan Script Solid · 20 pieces
← Santa’s Little Helper in Amatic SC All 12 Santa’s Little Helper designs Santa’s Little Helper in script and capitals →