Free Santa’s Little Helper SVG

Santa’s Little Helper in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa’s Little Helper in Amatic SC, as a solid black shape
Santa’s Little Helper in Amatic SC. The preview is the SVG file itself.

“Santa’s Little Helper” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces19 separate pieces
Outlines to cut23: 19 outer edges and 4 cut-outs
Cut length1,358 mm at this size
Narrowest part1 mm at this size
Nodes499 curve and line segments

Measured from the file. PNG: 1,404 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.69 × 1 in (18 × 25 mm)0.25 mm345 mm130Too fine for most machines
1.38 × 2 in (35 × 51 mm)0.51 mm690 mm35Fine detail: vinyl and paper only, weed with care
2.07 × 3 in (53 × 76 mm)0.76 mm1,035 mm15Fine detail: vinyl and paper only, weed with care
2.76 × 4 in (70 × 102 mm)1 mm1,380 mm8Vinyl, card and thin sheet
4.14 × 6 in (105 × 152 mm)1.5 mm2,070 mm2Vinyl, card and thin sheet
5.52 × 8 in (140 × 203 mm)2 mm2,759 mm2Vinyl, card and thin sheet
8.28 × 12 in (210 × 305 mm)3 mm4,139 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa’s Little Helper SVG files

← Santa’s Little Helper in Alfa Slab One All 13 Santa’s Little Helper designs Santa’s Little Helper in block capitals →