Santa’s Little Helper outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Santa’s Little Helper” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 92 mm (3.94 × 3.6 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 47: 21 outer edges and 26 cut-outs |
| Cut length | 2,148 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 657 curve and line segments |
Measured from the file. PNG: 2,000 × 1,837 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.92 in (25 × 23 mm) | 0.36 mm | 546 mm | 100 | Too fine for most machines |
| 2 × 1.83 in (51 × 46 mm) | 0.71 mm | 1,091 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.74 in (76 × 70 mm) | 1.1 mm | 1,637 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.66 in (102 × 93 mm) | 1.4 mm | 2,182 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.49 in (152 × 139 mm) | 2.1 mm | 3,274 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.32 in (203 × 186 mm) | 2.8 mm | 4,365 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.98 in (305 × 279 mm) | 4.3 mm | 6,547 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper stencil plate Solid · one piece -
Santa’s Little Helper with a drop shadow Layered · 12 pieces -
Santa’s Little Helper in Pacifico Solid · 8 pieces -
Santa’s Little Helper in Lobster Solid · 10 pieces -
Santa’s Little Helper in Kaushan Script Solid · 20 pieces -
Santa’s Little Helper in Lilita One Solid · 20 pieces -
Santa’s Little Helper in Alfa Slab One Solid · 20 pieces -
Santa’s Little Helper in Amatic SC Solid · 19 pieces
← Santa’s Little Helper with stars All 12 Santa’s Little Helper designs Santa’s Little Helper stencil plate →