Santa’s Little Helper in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Santa’s Little Helper” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 96 mm (3.94 × 3.79 in), scales to any size |
|---|---|
| Pieces | 20 separate pieces |
| Outlines to cut | 26: 20 outer edges and 6 cut-outs |
| Cut length | 1,269 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 414 curve and line segments |
Measured from the file. PNG: 2,000 × 1,927 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.96 in (25 × 24 mm) | 0.97 mm | 322 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.92 in (51 × 49 mm) | 1.9 mm | 645 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.89 in (76 × 73 mm) | 2.9 mm | 967 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.85 in (102 × 98 mm) | 3.9 mm | 1,289 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.77 in (152 × 147 mm) | 5.8 mm | 1,934 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.7 in (203 × 195 mm) | 7.7 mm | 2,579 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.54 in (305 × 293 mm) | 12 mm | 3,868 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa’s Little Helper SVG files
-
Santa’s Little Helper in Alfa Slab One Solid · 20 pieces -
Santa’s Little Helper in Amatic SC Solid · 19 pieces -
Santa’s Little Helper in block capitals Solid · 19 pieces -
Santa’s Little Helper in script and capitals Solid · 16 pieces -
Santa’s Little Helper with stars Solid · 16 pieces -
Santa’s Little Helper outline lettering Outline · 21 pieces -
Santa’s Little Helper stencil plate Solid · one piece -
Santa’s Little Helper with a drop shadow Layered · 12 pieces
← Santa’s Little Helper in Kaushan Script All 12 Santa’s Little Helper designs Santa’s Little Helper in Alfa Slab One →